MikroTik RBGPOE Gigabit PoE Injector Adapter (9-48V)
Ush 45,000
Skip to product information
MikroTik RBGPOE Gigabit PoE Injector Adapter (9-48V)
Ush 45,000
Shipping calculated at checkout.
The MikroTik RBGPOE is a compact gigabit passive PoE injector that delivers power over Ethernet to MikroTik outdoor routers, access points, and sector antennas. Supporting a wide input voltage range of 9V to 48V, the RBGPOE is the standard power solution for MikroTik outdoor devices that require passive PoE — including the SXT series, Groove series, MANTBox, LtAP Mini, and many others.
For ISPs and WISPs deploying MikroTik wireless equipment at tower sites, rooftops, and subscriber premises across Uganda, Kenya, Tanzania, Rwanda, and East Africa, the RBGPOE keeps your outdoor units powered cleanly through a single Cat6 cable run — no separate power lines, no weatherproofing of barrel connectors at the antenna.
Key Specifications
- Model: RBGPOE
- PoE Type: Passive PoE (non-802.3af)
- Input Voltage: 9V – 48V DC
- Ethernet Speed: Gigabit (10/100/1000 Mbps)
- Ports: 1x RJ45 input (from switch/router), 1x RJ45 output (to powered device), 1x DC barrel power input
- Cable Length: Short pigtail design for clean installations
- Compatibility: All MikroTik passive PoE-powered outdoor devices
Why Use the RBGPOE for ISP Deployments?
In ISP and WISP deployments, outdoor MikroTik units need reliable power at the point of installation — whether that's on a tower, a rooftop pole, or a subscriber's exterior wall. The RBGPOE makes this simple:
- Single cable run: Power and data travel over the same Cat6 cable from your distribution router to the outdoor device — no separate power supply at the antenna end.
- Wide voltage range: Works with 12V, 24V, and 48V power supplies — compatible with virtually any DC source available at your tower or distribution point.
- Gigabit throughput: Full 1Gbps speeds — no bottleneck on high-capacity backhaul or subscriber links.
- Compact form factor: Small enough to fit inside enclosures, distribution boards, or cable trays at the base of your tower or mast.
- Cost-effective: One of the most affordable accessories in any MikroTik outdoor deployment kit.
Compatible MikroTik Devices
The RBGPOE is the standard passive PoE injector for a wide range of MikroTik outdoor products, including:
- MikroTik RouterBOARD Wireless Router — Outdoor wireless distribution for point-to-multipoint links
- MikroTik mAP 2nD Wireless Access Point — Compact outdoor/indoor AP requiring passive PoE
- MikroTik hAP RouterBOARD with PoE — Subscriber CPE with PoE-in support
- MikroTik hAP lite RB941-2nD — Entry-level subscriber CPE
- MikroTik SXT series, Groove series, MANTBox series, LtAP Mini (passive PoE models)
Recommended Core Network Products
- MikroTik hEX S RB760iGS — Core ISP router with built-in PoE out — use RBGPOE where additional injectors are needed
- MikroTik hEX RB750Gr3 — Zone aggregation router; pair with RBGPOE injectors for outdoor unit power
Always run your PoE cable on quality Cat6 cabling for reliable gigabit throughput and minimal voltage drop over long cable runs to outdoor units.
ISP Billing Integration
Every outdoor MikroTik unit you power with the RBGPOE can be managed centrally via RouterOS API. Our ISP billing system integrates directly with MikroTik RouterOS to automate subscriber bandwidth control, service suspension, mobile money payment reconciliation, and instant reactivation — across every device on your network.
Frequently Asked Questions
What is the MikroTik RBGPOE used for?
The MikroTik RBGPOE is a passive PoE injector that powers MikroTik outdoor wireless devices over a standard Ethernet cable. It accepts a DC input between 9V and 48V and delivers power alongside gigabit data to the connected device — eliminating the need for a separate power cable at the outdoor unit.
Is the MikroTik RBGPOE compatible with 802.3af/at PoE switches?
No. The RBGPOE is a passive PoE injector, not an 802.3af/at active PoE device. It requires its own DC power input (9–48V) and injects that voltage onto the Ethernet cable. It should not be connected to active 802.3af/at PoE switch ports, as the voltage may differ from what the connected MikroTik device expects. Use it with a suitable DC power adapter matched to your device's input voltage requirements.
What voltage should I use with the RBGPOE for MikroTik outdoor devices?
Most MikroTik outdoor passive PoE devices accept 12V to 24V input. Always check the specific input voltage range of your MikroTik device before selecting a power adapter. The RBGPOE supports 9V–48V input, so it is compatible with 12V, 24V, and 48V adapters — just ensure the adapter voltage matches the device's specification.
Does the RBGPOE support gigabit speeds?
Yes. The MikroTik RBGPOE supports full gigabit (10/100/1000 Mbps) Ethernet speeds. It will not bottleneck high-capacity backhaul or subscriber links when used with gigabit-capable MikroTik devices and quality Cat6 cabling.
Where can I buy the MikroTik RBGPOE PoE injector in Uganda?
NetEdge Supplies stocks the MikroTik RBGPOE gigabit passive PoE injector in Uganda with delivery across East Africa. Browse our full MikroTik accessories collection and order online. Contact us for bulk ISP procurement orders.
Made with care
Great value
Elegant design
Quality materials
Details
This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Featured product
Cat6 Outdoor Ethernet Cable – 250ft UV-Resistant Copper-Clad Aluminium
Ush 185,000
Cat6 Outdoor Ethernet Cable — 250ft (76m) | UV-Resistant | Gold-Plated RJ45 | Gigabit Speed
The Cat6 Outdoor Ethernet Cable (250ft / 76 metres) is purpose-built for demanding outdoor and long-distance network installations. With a UV-re...
View product