Tool-Free RJ45 Connector Plugs – CAT6A / Cat7 / CAT8 Shielded STP Termination (Zinc Alloy)
Ush 15,000
Skip to product information
Tool-Free RJ45 Connector Plugs – CAT6A / Cat7 / CAT8 Shielded STP Termination (Zinc Alloy)
Ush 15,000
Shipping calculated at checkout.
Tool-Free RJ45 Connector Plugs — CAT6A / Cat7 / CAT8 Shielded STP Termination
Imagine terminating a high-speed CAT8 cable in under 60 seconds — no crimping tool, no punch-down block, no special skills required. The Tool-Free RJ45 Connector Plug uses a built-in IDC (Insulation Displacement Contact) mechanism that locks conductors into place with a simple push-and-close action. Clean, repeatable, and fieldproof.
At UGX 15,000 per unit (bulk pricing available), this is the fastest way to terminate shielded Cat6A, Cat7, and CAT8 cables on-site — whether you're commissioning a data centre patch panel, connecting a MikroTik CRS310 Cloud Router Switch, or building out a high-density ISP distribution room.
Why Tool-Free?
- No crimping tool needed — IDC contacts pierce the conductor insulation on closure; no separate tool purchase required
- Field-reusable — open, re-seat, and re-close if you mis-wire; saves expensive re-terminations
- Consistent termination quality — less dependent on technician skill vs. traditional crimp plugs
- Zero waste — no off-cuts, no mis-crimps to discard
- Shielded (STP) — full zinc alloy metal body provides 360-degree EMI shielding for high-noise environments
Compatibility
| Cable Type | Compatible | Notes |
|---|---|---|
| CAT8 (40GbE, 2000 MHz) | Yes | Primary use case; full shielding required |
| Cat7 (10GbE, 600 MHz) | Yes | S/FTP and SSTP shielded cables |
| CAT6A (10GbE, 500 MHz) | Yes | F/UTP and S/FTP variants |
| Cat6 UTP (standard) | Not recommended | Use our Cat6 Pass-Through Gold-Plated Plugs instead |
Tool-Free vs. Traditional Crimp Plug — Which Should You Choose?
| Feature | Tool-Free (This Product) | Traditional Crimp Plug |
|---|---|---|
| Crimping Tool Required | None needed | Required |
| Cable Categories | CAT6A, Cat7, CAT8 | Cat5e, Cat6 |
| Shielding | Full zinc alloy STP | Varies |
| Re-terminable | Yes | No (single use) |
| Speed of Termination | Under 60 seconds | 2 to 3 minutes |
| Best For | High-speed ISP and data centre runs | Standard office LAN |
Need crimp plugs for Cat6 UTP? See our Cat6 RJ45 Pass-Through Gold-Plated Connector Plugs.
Complete Your Cabling System
- Indoor UTP Cat6 LAN Cable — Cut to Length — for standard Cat6 runs (20m to 100m)
- Celertec Cat6 Outdoor 305m Cable Drum — for outdoor aerial and buried runs
- Professional Network Repair Tool Kit — for Cat6 crimping and cable testing
- Starter Network Repair Tool Kit — entry-level crimping for smaller jobs
- MikroTik ISP Starter Kit — 4-Device Bundle (Uganda) — the gear your cables will connect to
Automate Your ISP Billing After the Cabling Is Done
Once your high-speed infrastructure is terminated and live, managing subscribers is the next challenge. Our recommended ISP Billing and Management System handles PPPoE, hotspot authentication, automated invoicing, and M-Pesa / Airtel Money collections — built for Ugandan and East African ISPs.
Explore the ISP Billing System for Uganda
Technical Specifications
| Specification | Detail |
|---|---|
| Compatible Categories | CAT6A, Cat7, CAT8 |
| Termination Type | Tool-Free IDC (Insulation Displacement Contact) |
| Shielding | Full STP — 360-degree zinc alloy metal body |
| Conductor Size | 22 to 26 AWG (solid or stranded) |
| Contact Material | Zinc alloy with gold-plated contacts |
| Max Bandwidth | 2000 MHz (CAT8) |
| Max Data Rate | 40 Gbps (CAT8) |
| Wiring Standard | T568A / T568B |
| Tool Required | None |
| Price per Unit | UGX 15,000 |
Frequently Asked Questions
Do I need any tools to terminate cables with these connectors?
No. These connectors use a tool-free IDC mechanism — simply insert the cable conductors and close the housing. No crimping tool is required. If you need traditional crimp plugs for Cat6, see our Cat6 RJ45 Pass-Through Gold-Plated Plugs and a crimping kit.
Are these connectors compatible with standard Cat6 UTP cable?
These tool-free plugs are designed for shielded CAT6A, Cat7, and CAT8 cables. For standard Cat6 UTP cable — such as our Indoor UTP Cat6 LAN Cable — use our Cat6 Pass-Through Gold-Plated Connector Plugs instead.
Can I re-use these connectors if I make a wiring mistake?
Yes. Unlike traditional crimp plugs which are single-use, the tool-free housing can be opened, the conductors re-seated correctly, and the plug re-closed. This makes them highly practical for field technicians and beginners.
Are these connectors suitable for high-speed 10GbE or 40GbE networks?
Yes. CAT8-rated connectors support up to 40 Gbps at 2000 MHz, Cat7 supports 10 Gbps at 600 MHz, and CAT6A supports 10 Gbps at 500 MHz. They are ideal for connecting high-throughput devices like the MikroTik CRS310 Cloud Router Switch.
What ISP billing system do you recommend for Uganda?
We recommend a purpose-built ISP billing platform supporting PPPoE, hotspot, and mobile money (M-Pesa, Airtel Money) for East African operators. View the ISP Billing System for Uganda here.
Do you sell the cables to use with these connectors?
Yes. For indoor Cat6 runs, see our Indoor UTP Cat6 LAN Cable — Cut to Length. For outdoor deployments, see the Celertec Cat6 Outdoor 305m Drum.
Made with care
Great value
Elegant design
Quality materials
Details
This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Featured product
Cat6 Outdoor Ethernet Cable – 250ft UV-Resistant Copper-Clad Aluminium
Ush 185,000
Cat6 Outdoor Ethernet Cable — 250ft (76m) | UV-Resistant | Gold-Plated RJ45 | Gigabit Speed
The Cat6 Outdoor Ethernet Cable (250ft / 76 metres) is purpose-built for demanding outdoor and long-distance network installations. With a UV-re...
View product